给我留言
Your present positionHomeFileHow should fluorocarbon coatings be constructed?

How should fluorocarbon coatings be constructed?

Print article】 【Close the window】 【 Click:169】 【 AddTime:2017-6-28 9:20:39】
1 application status of fluorocarbon coatings
Since the Japanese Asahi company launched a fluorocarbon coating curing at room temperature, in late 1990s, China fluorine coating has also made great development. Because fluorocarbon coating is high-grade paint (viscous test can be used to detect, tensile testing machine) offer more expensive, commonly used in the city of the classic construction and major projects, the construction of the coating of goods and higher request. But now the use of fluorocarbon coating has the following errors: top quality coatings usually use a fluorocarbon coating; second, because the fluorocarbon coatings offer expensive construction shoddy work, paint after construction can not constitute outstanding maintenance coating; third, the wall maintenance and wall treatment is far less than the standard fourth, on request; the construction unit construction, lack of talent construction experience and construction skills; fifth, on the fluorocarbon coating itself, not the same as the fluorine resin manufacturers, through accelerated aging resistance experiment, found the weather very big difference. As for the fluorocarbon coating with normal temperature curing, its original construction skill is a new subject, from the beginning of 80s to the present, that is, it is almost 30 years. Now, the biggest difficulty in construction skills is to eliminate chromatic aberration and deal with film leveling.


Construction of 2 fluorocarbon coating on building wall

As regards the construction of any coating, all requirements are "dry and clean", and fluorocarbon coatings are no exception. In fact, in order to reach the ideal construction effect, prevent the color and leveling the bad disturbance caused by the following factors, the manipulation is very crucial: treating a substrate; a reasonable matching primer and finish the construction process; suitable; construction of the ideal construction of good things; and not the construction area for maintenance by dividing line in particular, a spraying construction. Fluorocarbon coating can be used tension test machine to measure viscosity. According to our summary of wall construction, we can choose the following construction plans:
Scheme 1: rigid flat bottom putty for exterior wall, rigid glossy putty for exterior wall, closed primer and fluorocarbon finish;


Scheme 2: rigid flat wall putty, high elasticity, elastic putty crack __ smooth putty, primer, fluorocarbon paint.

For the art effect coating system, the following construction options can be selected:


Scheme 3: exterior wall putty, rigid flat rigid napped putty, primer, fluorocarbon paint;


Scheme 4: rigid flat bottom putty for exterior wall, rigid glossy putty for exterior wall, rigid relief putty for exterior wall, closed primer and fluorocarbon finish;


Scheme 5: high elastic putty crack, elastic rough putty, primer, fluorocarbon paint;

Program 6: high elasticity anti cracking putty, elastic smooth putty, flexible relief putty, sealing primer, fluorocarbon finish paint.


Official website:http://en.kejian-tech.com/
Adhesive website:http://www.kinsgeo.com/en/

Alibaba: http://kejian-tech.en.alibaba.com/   https://kejiantest.en.alibaba.com/

Trade website:http://www.universal-testingmachines.com/