给我留言

Product Center

  • Product Name:Electric Car Battery Price Battery Pack Mechanical Turning Table KJX-302

  • Product Model:KJX-302
  • Design Standard:GB/T 31467.3-2015
  • Update Time:2017-3-21 9:14:55
  • Click:496

Introduction

 Electric Car Lithium Ion Battery Price Battery Pack Mechanical Turning Table KJX-302

Uses:

This machine is used to simulate the battery pack and battery system to rotate around the X axis or Y axis, the X/Y axis switching process does not need to re fix the battery pack, through the test to determine its safety performance.

 

Control:

1.Mode of operation: program mode, fixed value method

2.Control mode: PLC touch screen control and PC remote control, can achieve close and remote control in two ways

3.Test computer: equipped with Lenovo Yang days series commercial computer, CPU is the three generation core i5 processor, graphics card memory is 1GB, memory 4G, 19.5 inch display, hard disk capacity of 500g; the corresponding parameter setting and program operation can be operated on the computer and real-time data display, suitable for remote monitoring, monitor and control computer to set control room

4.The operating system interface is in Chinese or English, and the external control software is Chinese or English

5.Program settings: you can set the speed of flip, flip time, flip angle, the number of flip weeks, the middle time, etc., the following is the operating interface

6.The computer can monitor and record the speed, rotation angle, time, number of cycles and so on, and can save at least 6 months of testing and setting test curve.

 

Equipment structure product features:

1.The battery turnover test machine realizes the function of the electric turnover battery through the motor and the screw rod

2.Cover material: cold rolled steel plate, thickness 3mm, and advanced electrostatic spray treatment.

3.The servo motor is used to control the turnover mechanism.

4.Control mode: PLC automatic / manual control mode two.

5.Integral structure description:The whole frame with high strength steel welded, high bearing capacity, strong and durable; 4 column direction triangle reinforcement;Equipment base material: 45# cast steel welded, strong steel;The surface of the contact surface of the turning table and the test piece shall be provided with an insulating anticorrosive coating;Install the photoelectric induction device around the equipment and operating personnel to install the battery pack on the device, there is not any choice of action, maintain the stop state; and the operation of the equipment in the process, when the operator into the equipment automatically stop working range.

6.Methods: the battery is fixed by the adjustable clamp and band combination, which can flip around the table x axis and Y axis, the switching process without the need to secure the battery pack.

 

Electric Car Lithium Ion Battery Price Battery Pack Mechanical Turning Table KJX-302

 

1.The rotating shaft is connected by high strength stainless steel bearing, and the connection is stable.

2.Three color alarm lamp: located in the top of the test unit, when the equipment fails, there will be audible and visual alarm prompt operation personnel to stop processing failure.

3.Electrical overload protection device: when the equipment such as leakage, overvoltage, overcurrent protection will automatically alarm beep.

4.Lighting device: the top of the test box is equipped with a LED explosion-proof lamp, dust, explosion-proof, fire protection, explosion-proof lamp shell is easy to replace.

5.Color: can be customized according to customer requirements.

6.Control box: to ensure the safety of test, control box and test phase separation, realize remote control cable connection, connection line of 8-10 meters, play an effective protective effect.

7.The monitor function: equipment protective cover with a monitoring system that can monitor the equipment running status of the whole working range and test state, adjustable focus video surveillance camera pixels, not less than 8 million; the view displayed on 19 inch monitor, at least to save the video storage for 1 months, with a video loop.

8.Emergency stop: the device has a key emergency stop switch, emergency stop switch pressed, need to go through two actions to pull out the reset switch; control room is also set up a set of emergency stop switch.

9.Smoke and flame detection: there is smoke in the working area, and the function of flame perception.

 

Electric Car Battery Price Battery Pack Mechanical Turning Table KJX-302

Specification:

 

Design Standards

GB/T 31467.3-2015

Model

KJX-302

Maximum weight of test sample

1000kg

Maximum size of test sample(mm)

W2000 X D3000 X H1000

Turning table bearing

1000kg

Turning table size

W2000×L2000mm

The center height of the turning platform

greater or equal to1200mm

Flip mode

Clockwise and counterclockwise are optional

Driving mode

Servo motor drive

Equipment volume

3500*3900*3900mm(W*D*H)

Weight

About 3T

Power

AC220V±10%,50HZ

 

Protection system:

lighting system:

The inside of the box installation, waterproof, anti fog, high temperature resistant explosion-proof lamp, the lamp shell adopts Aluminum Alloy die-casting molding, surface electrostatic spray, the fin structure design makes the heat lamp surface does not accumulate, lamp protective cover made of high borosilicate glass transparent physical cover can effectively prevent glare proof design of atomization

Video monitoring system

The monitoring system for the external structure, observation window box is installed with an adjustable focal length video surveillance camera lens, through the observation window can clearly see the whole picture. The surveillance camera installed on the monitor support bracket, convenient movement and positioning. Not less than 8 million pixel camera, monitoring picture by 19 inches and above the display display, at the same time the camera data can save more than one month, the camera also can realize remote monitoring and real-time observation through the network, with a video loop

Strong smoke exhaust system

The explosion-proof box on the left side of the installation of large power high temperature exhaust fan, and set aside the exhaust guide tube connected to the external test power exhausting device, the exhaust switch integrated in the controller, can choose manual or automatic control mode

Explosion proof pressure relief device

Inside and outside the box is provided with an explosion-proof pressure relief port, explosion-proof mouth through the internal box, explosion-proof hole diameter not less than 300mm, when the inside pressure intensity is too large (about 30kgf), pressure relief device will automatically be opened, explosion-proof sealed with Toshiba high purity silica sealant, effective insulation to prevent aging, pressure relief port easily easy to open, easy to operate to achieve effective pressure relief vent function

CO2automatic fire extinguishing system

CO2 is equipped with manual and automatic fire extinguishing system, CO2 fire extinguisher at the right side of the box, the fire mouth through a test hole fixed on the test box, explosion-proof box containing high temperature flame detector, when the flame signal detection, automatic open fire switch through the electronic signal, and then through the cylinder to drive the automatic press fire handle, automatic open fire fire extinguishing device, but also can be opened manually to achieve manual fire extinguishing device, diagram is as follows

 

 

Safeguard:

1.Fault alarm and the reason, the processing prompt function;

2.Fault display and self diagnosis function;

3.Power off protection function;

4.Rotating angle overshoot alarm;

5.Such as leakage air switch: to prevent over-current and short circuit;

6.The power phase sequence protection,

7.Under voltage protection, overload protection,

8.Lack of phase protection,

9.Motor overheating protection, etc.

 

Equipment factory standard configuration and random file:

Flip test machine host: 1 set

Controller: 1 set

Installation layout: 1 copy

Electrical schematic: 1 copy

Instruction manual: 1 copy

Equipment maintenance instruction: 1 copy

Controller specification: 1 copy

Data acquisition system: 1 set

Fire extinguishing system: 1 set

Test dedicated computer: 1 set(hard disk capacity of not less than 1T)

Common fault description and Solution Manual :1 copy

Program disc :1 copy

Warranty card: 1 copy

Certificate of qualification: 1 copy

Third party calibration report 1 copy

 

Installation environment requirements:

1.Ambient temperature: 0 ~ 45

2 .Environmental humidity: less than 10% ~ 95%R.H

3 .Atmospheric pressure: 86 ~ 106kPa

4 .There is no strong vibration, no direct sunlight or other heat source direct irradiation

5 .Installation requirements for ground, ground flat and neat.

 

Electric Car Lithium Ion Battery Price Battery Pack Mechanical Turning Table KJX-302

Electric Car Battery Price Battery Pack Mechanical Turning Table KJX-302

 

Packaging & Shipping

 

Electric Car Lithium Ion Battery Price Battery Pack Mechanical Turning Table

  

Company Information

 

Electric Car Lithium Ion Battery Price

Electric Car Lithium Ion Battery Price

Electric Car Lithium Ion Battery Price

Electric Car Lithium Ion Battery Price

 

Certifications

 

Battery Price Battery Pack Mechanical Turning Table

 

Our Services

 

Dongguan Kejian Instrument Co., Ltd

 

During the whole business process, we offer Consultative Selling service.


Customer inquiry process:


Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.


Specifications customize process:


Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.


Order process:


We offer below business term:

Accepted Delivery Terms FOB, CFR, CIF, EXW, DDP
Accepted Payment Currency USD, EUR, HKD, CNY
Accepted Payment Type T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow
Nearest Port Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired

 


Production and delivery process:


We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.


Installation and after sale service:


Defines installing those products in the field and providing after-sales support.

 

 Electric Car Lithium Ion Battery Price Battery Pack Mechanical Turning Table KJX-302

Our Team:

Battery Price Battery Pack Mechanical Turning Table

 

FAQ

 

Electric Car Lithium Ion Battery Price Battery Pack Mechanical Turning Table KJX-302

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

 

2.Excellent after sale service:

1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.

 

3.Good Packaging:

 

Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc

 

Related products