给我留言

Product Center

  • Product Name:Battery safety testing equipment / Battery Drop Tester KJX-310

  • Product Model:KJX-310
  • Design Standard:
  • Update Time:2017-3-21 10:16:02
  • Click:504

Introduction

Battery safety testing equipment / Battery Drop Tester KJX-310

Uses:

The machine is suitable for the battery monomer, batteries, battery pack of the free fall down test. Battery pack or system with no electrolyte leakage, no fire, no explosion for qualified.

 

Structure function and its characteristics:

1.Drop test machine can be used to test the x/y/z axis and the surface / angle / edge of any direction of the free fall test.Equipped with PLC man-machine interface controller and encoder for height tracking, which can accurately give the product drop height, and the default drop height error is not more than 1%.

2.The utility model has the advantages of double arm and double column structure, and the utility model has the advantages of electric reset, electric control dropping and electric lifting device. The utility model has the advantages of convenient use, unique hydraulic buffer device, and greatly improves the service life, stability and safety of the machine.

3.The utility model has the advantages that the two arms can be conveniently placed at the same time, the distance between the two columns can be adjusted, and the test pieces with different specifications can be conveniently tested. The angle error of the impact angle and the plane angle of the bottom plate is less than or equal to 1 degrees.

4.Video monitoring system: test area to install the 4 adjustable focal length camera, from 4 angles of recording test. Pixel camera is not less than 8 million, with a 19 inch monitor screen can display and visual display, and video data can be saved for a month or more, the camera also can realize remote monitoring and real-time observation through the network, cycling video recording function.

5.Lighting system: test area to install 4 high brightness anti fog, dust, explosion-proof lights, from 4 different angles to illuminate the entire test space to facilitate monitoring and observation.

6.The control box is separated from the test box, and the remote control can be realized, and the utility model has the function of two protection.

7.Drop bottom plate: heavy, made of high impact material, in the test process is not easy to move, the surface is flat without defects, the surface can ensure that the package completely fall on the floor.

8.Drop plate: cement board, thickness of not less than 200mm or according to the special requirements of the matching.

 

Battery safety testing equipment / Battery Drop Tester KJX-310

 

9.Specimen: the device consists of a bracket can quickly move down the "e" type fork as specimen bracket, testing products in accordance with the requirements of test (x/y/z axis or surface / edge angle test). When the high speed test balance placed downward, testing products with "e" type fork fell to the latter, in high efficiency the shock absorber under the action of embedded flat on the floor.

10.Drop sketch map:

 

Battery safety testing equipment / Battery Drop Tester KJX-310

 

11.Sample turn table:Independent structure, separate distribution, the bottom is provided with casters, mobile and convenient use; for turnover lifting structure, and sample bracket can remain at the same height, convenient object conveying; turnover table size l3000*w2000mmm, rails installed on the table, for the object to be tested in and out.

 

Control part function and characteristic:

1.The close touch screen to control the remote computer control type control mode with high precision encoder, which can accurately describe product drop height, and the preset drop height error is less than + 1%, and can easily set the required drop height, operation screen as shown below:

2.Height display accuracy:±1mm

3.Control box: in order to ensure the safety of the test, the control box is separated from the test instrument, and can realize the remote wired connection control.

4.Anti misoperation system: before and after the installation of the entire equipment to install two sets of grating sensing system, when there is a foreign body file, the system can not do the drop action, can effectively prevent the wrong operation and protect the safety of testers.

 

Specification:

 

Equipment usage conditions:

1.laboratory temperature range:0~40℃

2.relative humidity:Less than equal90%R.H,non-condensing

3.Atmospheric pressure:86~106kPa

4.Air quality:No high concentration of dust and corrosive gas, no flammable and explosive gases.

5.There is no strong vibration around, no direct sunlight or other heat source direct irradiation.

6.The mounting surface for the ground, the ground requires clean flat.

7.Maintain channel at least 1m

 

 

Packaging & Shipping

Battery safety testing equipment / Battery Drop Tester KJX-310

  Battery safety testing equipment / Battery Drop TesterBattery safety testing equipment / Battery Drop Tester

Company Information

Battery safety testing equipment / Battery Drop Tester

Battery Drop TesterBattery Drop Tester

Battery Drop Tester


Certifications

Battery Drop Tester

 

Our Services

Dongguan Kejian Instrument Co., Ltd

 

During the whole business process, we offer Consultative Selling service.


Customer inquiry process:


Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.


Specifications customize process:


Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.


Order process:


We offer below business term:

Accepted Delivery Terms FOB, CFR, CIF, EXW, DDP
Accepted Payment Currency USD, EUR, HKD, CNY
Accepted Payment Type T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow
Nearest Port Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired

 
Production and delivery process:


We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.


Installation and after sale service:


Defines installing those products in the field and providing after-sales support.

 

 Battery safety testing equipment / Battery Drop Tester KJX-310

Our Team:

Electric Car Lithium Ion Storage Battery

 

FAQ

Battery safety testing equipment / Battery Drop Tester KJX-310

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

 

2.Excellent after sale service:

1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.

 

3.Good Packaging:

Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc

 

Related products