给我留言

Product Center

  • Product Name:Power Battery Hot Shock Test Chamber KJX-308

  • Product Model:KJX-308
  • Design Standard:GB/T 31467.3-2015,GB/T 31485-2015,GB/T 31486-2015,ISO 12405-3
  • Update Time:2017-3-21 10:38:26
  • Click:497

Introduction

Power Battery Hot Shock Test Chamber KJX-308

Uses:

This machine can be used to Moulded case stress at high ambient temperatures and Thermal abuse testing.

Design principle:

Built-in forced air circulation, pouring by circular motor drives the rotor running through a electric heater, hot air from air duct to the thermal shock inside the box, thus reduce the energy loss and the temperature uniformity in the oven, when the door open and close action cause disturbance, can respond quickly to supply air circulation system operation status, temperature, runs in and out of port, the wind road smooth circulation, breath fast, avoid too high spontaneous combustion explosion of combustible gas concentration.

 

Standards:

GB/T 31467.3-2015,GB/T 31485-2015,GB/T 31486-2015,ISO 12405-3,IEC 62660-2,SAE J 2464,ISO 20653,IEC62133-2012,GB/T 2423.1-2008,GB/T 2423.2-2008,GB/T 2423.3-2006,GB/T 2423.4-2008,GB/T 2423.22-2012 ,GB/T 2423.34-2012,GJB 150-2009,ISO 16750-1,ISO 16750-1,ISO 16750-2,ISO 16750-3,ISO 16750-4,ISO 16750-5,QC/T 741-2014,QC/T 742-2006,QC/T 743-2006,QC/T 744-2006,GB/T 18333.2-2015,UL1642,UN38.3,,GB/T 10589-2008,GB/T 10592-2008,GB/T 11158-2008 etc.

 

Temperature control system that:

1. There is a wide range of temperature control, can meet the various needs of users;

2. The unique way of balance temperature adjustment, can adjust the ideal temperature environment.With stable and balanced heating ability of high precision, high stability temperature control;

3. Can choose touch intelligent temperature control program temperature controller (PID + SSR/SCR is inverse two-way synchronous output), it contains advanced slope control logic of the computer, with RS 485 communication interface device, making it easy for users to process system and centralized control over a long distance.On-line computer control, editing, recording and two groups of dynamic contact (TIMERSINGALRELAY), intuitive easy to read, be clear at a glance, and can be equipped with temperature and humidity recorder;

4. All of the components of heating, cooling, completely by the microcomputer automatic control, system individual completely independent;Equipped with intelligent controller, thus make the setting accuracy is greatly improved;

5. Program correction, removal, make an appointment to start, power failure memory function, through the test software and data cables can be connected directly to the computer cable long-distance remote control;

6. Automatic selection of refrigeration loop: automatic control device has a temperature setting value automatically choose the performance of the refrigeration circuit operation, implementation of directly start the chiller under high temperature cooling, refrigeration adopted air-cooled compressor unit, using closed compressor (import);

7. The door is equipped with light observation window, conditions for convenient observation of test samples.

Touch screen smart program controller:

Adopt imported microcomputer LCD LCD (320 * 240 dots) control system, in both English and Chinese LCD touch screen panel, 17 section of adjustable backlight, curve, according to set value & value curve can be displayed respectively a variety of alarm, fault occurs through screen display, eliminate the wrong operation.Multiple sets of PID control, the data will be displayed on the screen.

RS485 interface: test chamber with a 485 communication interface, by testing the test software and data cable can be connected in order to realize the computer control;

USB interface: device with USB storage interface, including information stored in the test time and test target values and experimental values of main operation parameters, the USB interface support hot plug and download functions, data can be stored directly in the U disk, and then import the data through the computer USB interface.

Power battery hot shock test chamber KJX-308

Power battery hot shock test chamber KJX-308

Structural characteristics of introduction:

1, structure features: carton manufacture paint + heat preservation cotton + reinforcement plate + inner box stainless steel a integrated, hinge at the door is equipped with traction, make the equipment in the process of test in the event of a fire or explosion a battery, can do traction, and the door will not be made, can protect the tester in the right safety test environment.

2, observation window, the door is located in the front, double layer thickening of toughened glass, effectively prevent the possibility of the destructive force of the explosion on the casing;

3, explosion-proof pressure relief device: box on the left side of the explosion-proof pressure mouth open, the pressure around the mouth adopts high-temperature sealing strip sealing, thermal insulation layer using soft aluminum foil and efficient compression glass cotton (same as the device itself thermal insulation material, form a Mosaic of explosion-proof pressure.)When the intensity of pressure in the cabinet is too large (about 30 KGF), explosion-proof pressure will open mouth, can achieve the function of the effective relief explosion, explosion-proof easy open mouth easily, sealing connection is good, easy to operate, within one meter after vent for clearing, shall not pile up sundry;

4, locks, the door is using high temperature resistant explosion-proof door lock, effective protective casing;

5, castor: at the bottom of the box body is equipped with belt brake universal casters, convenient transportation and location.

6, exhaust device: the body side to install the fan exhaust device and an external exhaust guide, high-power breeze for the filtering device, convenient external laboratory exhaust device medallion integration on the control panel can be automatic control or manual control the opening and closing.

Power battery hot shock test chamber KJX-308

 

Specifications:

Power battery hot shock test chamber KJX-308

 

Equipment conditions of use:

RT:Equipment shall be suitable for ambient temperature range:-5℃~+40℃;

Humidity:Equipment shall be suitable for environment humidity range:less than or equal to90%R.H No condensation;

Noise:Meet the national standards,≤70dB;

Atmospheric pressure:86~106kPa;

Air quality: high concentration of dust and corrosive gas, no inflammable and explosive gas;

Around without strong vibration, without direct sunlight or other heat source direct illuminate,Installed base for ground, the ground requires clean and smooth;

Input power: power AC380V plus or minus 10%, three-phase five wire 50 plus or minus 2 hz, maximum use of power equipment is not more than 5 kw, safety grounding;

Power battery hot shock test chamber KJX-308

 

Packaging & Shipping

Power battery hot shock test chamber KJX-308

Production-Process:

Power battery hot shock test chamber KJX-308Power battery hot shock test chamber KJX-308

Company Information

Power battery hot shock test chamber KJX-308

Power battery hot shock test chamber KJX-308Power battery hot shock test chamber KJX-308

Power battery hot shock test chamber KJX-308

 

Certifications

Power battery hot shock test chamber


Our Services

Dongguan Kejian Instrument Co., Ltd

 

During the whole business process, we offer Consultative Selling service.


Customer inquiry process:


Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.


Specifications customize process:


Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.


Order process:


We offer below business term:

Accepted Delivery Terms FOB, CFR, CIF, EXW, DDP
Accepted Payment Currency USD, EUR, HKD, CNY
Accepted Payment Type T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow
Nearest Port Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired

 
Production and delivery process:


We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.


Installation and after sale service:


Defines installing those products in the field and providing after-sales support.

 

 Power Battery Hot Shock Test Chamber KJX-308

Our Team:

Power battery hot shock test chamber

 

FAQ

Power Battery Hot Shock Test Chamber KJX-308

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

 

2.Excellent after sale service:

1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.

 

3.Good Packaging:

Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

Related products